Hydraulic Pressure Cycling and Performance Evaluation of five (5) DOT-3AL 2015 Cylinders PDF

If you have any technical questions not addressed by this or associated documents, contact Mark Toughiry, 202-366-4545.

Hydraulic Pressure Cycling and Performance Evaluation of DOT-3AA Cylinder

The main purpose of this technical evaluation was to determine the integrity of the cylinder design and testing. Also to ensure that the manufacturing of the cylinder met the minimum requirement of DOT 3AA specification.

If you have any technical questions not addressed by this...

Hydraulic Pressure Cycling and Performance Evaluation of DOT-3AA Cylinder PDF

If you have any technical questions not addressed by this or associated documents, contact Mark Toughiry, 202-366-4545.

Guidance for Conducting Hazardous Materials Flow Studies

Transportation Research Guidebook's Hazardous Materials Cooperative Research Program (HMCRP) Report 3: Guidebook for Conducting Local Hazardous Materials Commodity Flow Studies updates the U.S. Department of Transportation's Guidance for Conducting Hazardous Materials Flow Surveys. All modes of...

Fractographic and Microstructural Examination of a Ruptured DOT-3AL Specification Compressed Gas Cylinder

The main purpose of this technical evaluation was to determine the cause of an aluminum cylinder failure in Wonderlake, TX

Key Words: SLC, sustain load crack, SCUBA, DOT 3AL cylinder, fractographic, ruptured cylinder, SEM analysis, ruptured DOT-3AL

If you have any...

Fractographic and Microstructural Examination of a Ruptured DOT-3AL Specification Compressed Gas Cylinder PDF

If you have any technical questions not addressed by this or associated documents, contact Mark Toughiry, 202-366-4545.

Forensic Evaluation and Documentation of Pressure Relief Devices (PRDs) of Argon Cryogenic Portable Tank

This research project is a part of Failure Investigation relating to an argon portable tank incident in Port Everglades, Florida.  The final report provides comprehensive testing and analysis of the pressure relieve devices (PRDs) used on the cryogenic argon portable tank....

Fire Investigation of DOT 3AL Cylinder Failure in Luraville, FL

The main purpose of this technical evaluation was to determine the initial cause of an aluminum oxygen cylinder failure in Luraville, FL. Evaluation included chemical analysis and cause for ignition on the cylinder valve.

Key Words: oxygen, chemical analysis, DOT 3AL...

Fire Investigation of DOT 3AL Cylinder Failure in Luraville, FL PDF

If you have any technical questions not addressed by this or associated documents, contact Mark Toughiry, 202-366-4545.

Fatigue Life Improvement of DOT-CFFC Composite Cylinders

The main purpose of this research work was to addresses the efficacy of a re-Autofrettage process of the cylinder for improving the fatigue performance of past service life DOT-CFFC composite overwrapped Type III pressure cylinders. Previous research has found that hard water exposure...