USA Banner

Official US Government Icon

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure Site Icon

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

U.S. Department of Transportation U.S. Department of Transportation Icon United States Department of Transportation United States Department of Transportation

Interpretation Response #PI-75-0114 ([Luke Ernst and Associates, Inc.] [Mr. Luke Ernst])

Below is the interpretation response detail and a list of regulations sections applicable to this response.

Interpretation Response Details

Response Publish Date:

Company Name: Luke Ernst and Associates, Inc.

Individual Name: Mr. Luke Ernst

Location State: GA Country: US

View the Interpretation Document

Response text:

PI-75-0114

December 2, 1975

Mr. Luke Ernst
Luke Ernst and Associates, Inc.
P. O. Box 32096
Decatur, GA 30032

Dear Mr. Ernst:

In your recent letter received November 10, 1979, you ask if it is necessary that the reinforced epoxy resin pipe used in the Dresser Manufacturing Style 390 Meter Riser comply with all pertinent requirements of the Federal safety standards, such as Sections 192.59, 192.121, 192.123, 192.513, and Appendix B-1-ASTM D2517.

The Office of Pipeline Safety Operations does not endorse or certify proprietary items. As a segment of a pipeline under the definition in Section 192.3, the epoxy resin pipe must comply with the requirements mentioned above and any other appropriate requirements of Part 192. Where a material specification is referenced by Part 192, it should be noted that only those editions listed in Appendix A or B are acceptable. Later published editions are not acceptable until they are approved and added to the appendices where appropriate.

Thank you for your interest in pipeline safety.

Sincerely,

SIGNED
Cesar DeLeon
Acting Director
Office of Pipeline
Safety Operations

Regulation Sections

Section Subject
192.121 Design of plastic pipe
192.123 Design limitations for plastic pipe
192.3 Definitions
192.513 Test requirements for plastic pipelines
192.59 Plastic pipe