USA Banner

Official US Government Icon

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure Site Icon

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

U.S. Department of Transportation U.S. Department of Transportation Icon United States Department of Transportation United States Department of Transportation

Interpretation Response #01-0211 ([Alloy & Metal Processors, Inc.] [Mr. William P. Murphy])

Below is the interpretation response detail and a list of regulations sections applicable to this response.

Interpretation Response Details

Response Publish Date:

Company Name: Alloy & Metal Processors, Inc.

Individual Name: Mr. William P. Murphy

Location State: AL Country: US

View the Interpretation Document

Response text:

AUG 17, 2001

Mr. William P. Murphy                            Ref. No. 01-0211
Owner/President
Alloy & Metal Processors, Inc.
623-33rd Place North
Birmingham, AL 35222

Dear Mr. Murphy:

This is in response to your letter requesting confirmation that the test results of a sample of 75% ferrosilicon demonstrate that it is not subject to the Hazardous Materials Regulations (HMR; 49 CFR Parts 171-180). You state that your product was tested in accordance with the test method described in 49 CFR part 173, Appendix E (revised edition as of October 1, 1996), and found it does not meet the definition of a Division 4.3 (Dangerous When Wet) material.

As provided in § 173.22, it is the shipper's responsibility to properly classify a hazardous material. However, if the ferrosilicon handled by your company is the same material that was tested in accordance with requirements that now appear in the U.N. Manual of Tests and Criteria, and determined not to meet the Division 4.3 criteria, it is not subject to the HMR.

I hope this satisfies your request.

Sincerely,

 

Thomas G. Allan
Senior Transportation Regulations Specialist
Office of Hazardous Materials Standards

173.22

Regulation Sections

Section Subject
173.22 Shipper's responsibility