Interpretation Response #07-0151 ([Hawkins, Inc.] [Mr. Chris W. Gibson])
Below is the interpretation response detail and a list of regulations sections applicable to this response.
Interpretation Response Details
Response Publish Date:
Company Name: Hawkins, Inc.
Individual Name: Mr. Chris W. Gibson
Location State: MN Country: US
View the Interpretation Document
Response text:
Sep 6, 2007
Mr. Chris W. Gibson Reference No. 07-0151
EHS&R Manager
Hawkins, Inc.
3100 East Hennepin Avenue
Minneapolis, MN 55413
This is in response to your February 8, 2007 letter concerning the applicability of the Hazardous Materials Regulations (HMR: 49 CFR 171-180) to the location of placards on Intermediate Bulk Containers (IBC5). We apologize for the delay.
In your letter, you state that many IBCs are now built with large-radius corners. You state that these large-radius corners provide an area on which to affix a placard. You also provide photographs of a placard affixed on a large-radius corner of an IBC. You ask whether these corners are an acceptable "side" to affix a placard as required by the HMR.
It is the opinion of this Office that provided the placards are affixed on two opposite sides of an IBC, a large-radius corner is an acceptable area to affix a placard.
I hope this information is helpful.
Sincerely,
John A. Gale,
Chief, Standards Development
Office of Hazardous Materials Standards
172.514(c)
Regulation Sections
Section | Subject |
---|---|
172.514 | Bulk packagings |