USA Banner

Official US Government Icon

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure Site Icon

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

U.S. Department of Transportation U.S. Department of Transportation Icon United States Department of Transportation United States Department of Transportation

Interpretation Response #PI-79-022 ([Kansas Public Service Company, Inc.] [William C. Salone, III])

Below is the interpretation response detail and a list of regulations sections applicable to this response.

Interpretation Response Details

Response Publish Date:

Company Name: Kansas Public Service Company, Inc.

Individual Name: William C. Salone, III

Location State: KS Country: US

View the Interpretation Document

Response text:

Mr. William C. Salone, III

Vice President & General Manager

Kansas Public Service Company, Inc.

733 Massachusetts

Lawrence, Kansas 66044

Dear Mr. Salome:

This refers to your letter of March 9, 1979, regarding safety recommendations made to your company in NTSB's report No. PAR-78-4. In connection with certain recommendations about
the use of anchors to prevent the pullout of plastic pipe from mechanical fittings, you have asked what constitutes an "anchor" and whether any transition couplers on the market can be considered an "anchor."

The Federal safety standards for gas pipelines (CFR Part 192) do not define the term "anchor," although it is used in Section 192.161(e). This rule provides that "Each underground pipeline that is connected to a relatively unyielding line or other fixed object must have enough flexibility to provide for possible movement, or it must have an anchor that will limit the movement of the pipeline." The purpose of this rule is to ensure that a pipeline is not damaged by anticipated movement. Since this objective may be accomplished by holding the pipeline in place, an "anchor" would comprise any method by which the pipeline is firmly fixed to limit movement, including, if the anticipated movement is due to pullout forces, the use of properly designed and installed couplers.

Various manufacturers are producing couplers which can restrain the movement of plastic pipe within design limits and satisfy Section 192.161(e).

I hope this reply has been responsive to your inquiry. If we can be of further assistance, please do not hesitate to contact us again.

Sincerely,

/signed/

Cesar DeLeon

Associate Director for

Pipeline Safety Regulation

Materials Transportation Bureau

Regulation Sections

Section Subject
192.161 Supports and anchors