Interpretations Browser
- § 178.33
Specification 2P; inner nonrefillable metal receptacles - § 178.33-7
Wall thickness - § 178.33-9
Marking - § 178.33a
Specification 2Q; inner nonrefillable metal receptacles - § 178.33a-8
Tests - § 178.33b-5
Material - § 178.33b-7
Design qualification test - § 178.33b-9
Marking - § 178.35
General requirements for specification cylinders - § 178.36
Specification 3A and 3AX seamless steel cylinders - § 178.37
Specification 3AA and 3AAX seamless steel cylinders - § 178.42
Specification 3E seamless steel cylinders - § 178.45
Specification 3T seamless steel cylinder - § 178.46
Specification 3AL seamless aluminum cylinders - § 178.47
Specification 4DS welded stainless steel cylinders for aircraft use - § 178.50
Specification 4B welded or brazed steel cylinders - § 178.51
Specification 4BA welded or brazed steel cylinders - § 178.53
Specification 4D welded steel cylinders for aircraft use - § 178.55
Specification 4B240ET welded or brazed cylinders - § 178.57
Specification 4L welded insulated cylinders - § 178.60
Specification 8AL steel cylinders with porous fillings for acetylene - § 178.61
Specification 4BW welded steel cylinders with electric-arc welded longitudinal seam - § 178.65
Specification 39 non-reusable (non-refillable) cylinders - § 178.68
Specification 4E welded aluminum cylinders - § 178.69
Responsibilities and requirements for manufacturers of UN pressure receptacles - § 178.70
Approval of UN pressure receptacles - § 178.71
Specifications for UN pressure receptacles - § 178.74
Approval of MEGCs - § 178.75
Specifications for MEGCs - § 178.81
Drop test - § 178.273
Approval of Specification UN portable tanks - § 178.274
Specifications for UN portable tanks - § 178.275
Specification for UN Portable Tanks intended for the transportation of liquid and solid hazardous materials - § 178.277
Requirements for the design, construction, inspection and testing of portable tanks intended for the transportation of refrigerated liquefied gases - § 178.320
General requirements applicable to all DOT specification cargo tank motor vehicles - § 178.337-8
Openings, inlets, and outlets - § 178.337-9
Pressure relief devices, piping, valves, hoses, and fittings - § 178.337-10
Accident damage protection - § 178.337-11
Accident damage protection - § 178.337-16
Testing - § 178.337-17
Marking - § 178.337-18
Certification - § 178.337
Specification MC 331; cargo tank motor vehicle primarily for transportation of compressed gases as defined in subpart G of part 173 of this subchapter - § 178.337-1
General requirements - § 178.337-3
Structural integrity - § 178.338-10
Accident damage protection - § 178.338-16
Inspection and testing - § 178.345
General design and construction requirements applicable to Specification DOT 406 (178.346), DOT 407 (178.347), and DOT 412 (178.348) cargo tank motor vehicles - § 178.345-1
General requirements - § 178.345-2
Material and material thickness - § 178.345-3
Structural integrity - § 178.345-5
Manhole assemblies - § 178.345-7
Circumferential reinforcements - § 178.345-8
Accident damage protection - § 178.345-9
Pumps, piping, hoses and connections - § 178.345-10
Pressure relief - § 178.345-11
Tank outlets - § 178.345-14
Marking - § 178.345-15
Certification - § 178.346-3
Pressure relief - § 178.347
Specification DOT 407; cargo tank motor vehicle - § 178.347-1
General requirements - § 178.347-4
Pressure relief - § 178.347-5
Pressure and leakage test - § 178.348
Specification DOT 412; cargo tank motor vehicle - § 178.348-1
General requirements - § 178.350
Specification 7A; general packaging, Type A. - § 178.500
Purpose, scope and definitions - § 178.503
Marking of packagings - § 178.504
Standards for steel drums - § 178.508
Standards for fiber drums - § 178.509
Standards for plastic drums and jerricans - § 178.512
Standards for steel, aluminum or other metal boxes - § 178.513
Standards for boxes of natural wood - § 178.514
Standards for plywood boxes - § 178.516
Standards for fiberboard boxes - § 178.521
Standards for paper bags - § 178.522
Standards for composite packagings with inner plastic receptacles - § 178.523
Standards for composite packagings with inner glass, porcelain, or stoneware receptacles - § 178.601
General requirements - § 178.602
Preparation of packagings and packages for testing - § 178.603
Drop test - § 178.604
Leakproofness test - § 178.605
Hydrostatic pressure test - § 178.606
Stacking test - § 178.608
Vibration standard - § 178.609
Test requirements for packagings for infectious substances - § 178.700
Purpose, scope and definitions - § 178.702
IBC codes - § 178.703
Marking of IBCs - § 178.704
General IBC standards - § 178.705
Standards for metal IBCs - § 178.706
Standards for rigid plastic IBCs - § 178.707
Standards for composite IBCs - § 178.710
Standards for flexible IBCs - § 178.801
General requirements - § 178.803
Testing and certification of IBCs - § 178.813
Leakproofness test - § 178.814
Hydrostatic pressure test - § 178.815
Stacking test - § 178.819
Vibration test - § 178.920
Standards for metal Large Packagings - § 178.955
General requirements - § 178.965
Drop test - § 178.980
Stacking test
Part 178 SPECIFICATIONS FOR PACKAGINGS
Section § 178.609: Test requirements for packagings for infectious substances
Below are the available interpretations for the given section. To return to the list of parts, use the Parts link above. The menu to the left provides a full list of sections that have interpretations. To view interpretations for a different section, click on the menu item.The regulations text of the section can be found on the eCFR website. To view the regulations text, use the link below. For assistance, please send an email to PHMSA.Webmaster@dot.gov.
View regulations for Part 178
Ref ID | Date | Company Name | Individual Name | Response Document |
---|---|---|---|---|
21-0019 | 05-26-2021 | Burlington Products, Inc. | Bill Greene | View |
19-0012 | 06-03-2019 | Military Surrface Deployment and Distibution Command | Jeffrey Leitschuh | View |
15-0152 | 02-17-2016 | DiSorb Systems, Inc | Mr. Ted McLaughlin | View |
15-0170 | 02-10-2016 | Inmark Packaging | Mr. Jay Johnson | View |
15-0154 | 02-01-2016 | Inmark Packaging, Inc. | Mr. Jay Johnson | View |