USA Banner

Official US Government Icon

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure Site Icon

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

U.S. Department of Transportation U.S. Department of Transportation Icon United States Department of Transportation United States Department of Transportation

Interpretation Response #PI-74-0102 ([Alabama Public Service Commission] [Larry E. Wladrop])

Below is the interpretation response detail and a list of regulations sections applicable to this response.

Interpretation Response Details

Response Publish Date:

Company Name: Alabama Public Service Commission

Individual Name: Larry E. Wladrop

Location State: AL Country: US

View the Interpretation Document

Response text:

January 25, 1974

Mr. Larry E. Wladrop
Alabama Public Service Commission
P.O. Box 991
Montgomery, AL 36102

Dear Mr. Waldrop:

Your letter to Mr. Frank Fulton dated  January 7, 1974, asked if certain service risers made for use with plastic service piping would meet Office of Pipeline Saftety’s regulations.  You specifically named items made by Perfection Coprporation and Kerotest Manufacturing Corporation, both of which consist of a metal sheath used as a protective shield over a plastic service riser assembly.  From the information provided it appears that if these risers are installed so that all the below ground gas containing materials are plastic, no cathodic protection is required.  The metallic sheath is not considered part of a pipeline as that term is defined in Section 192.3 of the Federal safety standards.  However, the installation must still comply with the requirements of Section 192.375, Service lines: plastic, and the limitations of Section 192.123, Design limitations for plastic pipe, are applicable.

Thank you for your interest.  We trust this answers your question satisfactorily.


Joseph C. Caldwell
Office of Pipeline Safety

Regulation Sections

Section Subject
192.123 Design limitations for plastic pipe