USA Banner

Official US Government Icon

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure Site Icon

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

U.S. Department of Transportation U.S. Department of Transportation Icon United States Department of Transportation United States Department of Transportation

Interpretation Response #98-0564 ([Manchester Tank] [Mr. Randy Wahl])

Below is the interpretation response detail and a list of regulations sections applicable to this response.

Interpretation Response Details

Response Publish Date:

Company Name: Manchester Tank

Individual Name: Mr. Randy Wahl

Location State: TN Country: US

View the Interpretation Document

Response text:

DEC 31, 1997

 

Mr. Randy Wahl
Director of Technical Development
Manchester Tank
1749 Mallory Lane #400
Brentwood, TN 37027
Dear Mr. Wahl:

This is in response to your letter requesting clarification of inspection report requirements in
49 CFR178.35. Specifically, you ask whether your current Inspector's Report is acceptable after October 1, 1997, since the report currently contains at least the minimum information required in.  the Compresses Gas Association (CGA) Pamphlet C-l1.

The answer is yes. Section 178.35(g) specifies that each report must contain, at a minimum, the applicable information listed in CGA Pamphlet C-ll.

I hope this information is helpful. Should you have further questions, do not hesitate to contact us.

Sincerely,

 

Hattie L. Mitchell, Chief
Exemption and Regulations Termination
Office of Hazardous Materials Standards

178.35

Regulation Sections

Section Subject
178.35 General requirements for specification cylinders