Interpretation Response #98-0564 ([Manchester Tank] [Mr. Randy Wahl])
Below is the interpretation response detail and a list of regulations sections applicable to this response.
Interpretation Response Details
Response Publish Date:
Company Name: Manchester Tank
Individual Name: Mr. Randy Wahl
Location State: TN Country: US
View the Interpretation Document
Response text:
DEC 31, 1997
Mr. Randy Wahl
Director of Technical Development
Manchester Tank
1749 Mallory Lane #400
Brentwood, TN 37027
Dear Mr. Wahl:
This is in response to your letter requesting clarification of inspection report requirements in
49 CFR178.35. Specifically, you ask whether your current Inspector's Report is acceptable after October 1, 1997, since the report currently contains at least the minimum information required in. the Compresses Gas Association (CGA) Pamphlet C-l1.
The answer is yes. Section 178.35(g) specifies that each report must contain, at a minimum, the applicable information listed in CGA Pamphlet C-ll.
I hope this information is helpful. Should you have further questions, do not hesitate to contact us.
Sincerely,
Hattie L. Mitchell, Chief
Exemption and Regulations Termination
Office of Hazardous Materials Standards
178.35
Regulation Sections
| Section | Subject |
|---|---|
| 178.35 | General requirements for specification cylinders |