Interpretation Response #PI-74-0132 ([Williams Brothers Engineering Company] [Mr. Clint McClure])
Below is the interpretation response detail and a list of regulations sections applicable to this response.
Interpretation Response Details
Response Publish Date:
Company Name: Williams Brothers Engineering Company
Individual Name: Mr. Clint McClure
Location State: OK Country: US
View the Interpretation Document
Response text:
Mr. Clint McClure
Williams Brothers Engineering Company
Resource Sciences Center
Tulsa, OK 64103
Dear Mr. McClure:
This responds to your letter of June 25, 1974, requesting an interpretation of the term "right-of-way" as it relates to the term "railroad" under §192.111(b)(2).
In this section:
"(b) A design factor of 0.60 or less must be used in the design formula in §192.105 for steel pipe in Class 1 locations that :
"(2) Crosses without a casing, or makes a parallel encroachment on, the right-of-way of either a hard surfaced road, a highway, a public street, or a railroad.
The term "right-of-way" is not defined in 49 CFR Part 192. Terms which are not defined are intended to have the ordinary dictionary meaning. The Random House College Dictionary defines "right-of-way" in relation to a railroad as "the strip of land acquired for use by a railroad for tracks. " We believe this definition is adequate for understanding §192.111(b)(2).
We trust our reply is helpful to you.
Sincerely,
/signed/ Edward F. Cygan
Joseph C. Caldwell
Director
Office of Pipeline Safety
Regulation Sections
Section | Subject |
---|---|
192.105 | Design formula for steel pipe |