USA Banner

Official US Government Icon

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure Site Icon

Secure .gov websites use HTTPS
A lock ( ) or https:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

U.S. Department of Transportation U.S. Department of Transportation Icon United States Department of Transportation United States Department of Transportation

Interpretation Response #25-0165

Below is the interpretation response detail and a list of regulations sections applicable to this response.

Interpretation Response Details

Response Publish Date:

Company Name: Scopelitis, Garvin, Light, Hanson & Feary, P.C.

Individual Name: Timothy W. Wiseman

Location State: IN Country: US

View the Interpretation Document

Response text:

October 15, 2026

Timothy W. Wiseman
Partner
Scopelitis, Gavin, Light, Hanson & Feary, P.C.
10 West Market Street Suite 1400
Indianapolis, IN  46204-2909

Reference No. 25-0165

Dear Mr. Wiseman:

This is in response to your December 29, 2025 letter requesting clarification of the Hazardous Materials Regulations (HMR; 49 CFR Parts 171-180) applicable to the transportation of sharps containers in wheeled racks. You state that compliance with the "full rows" language in § 173.134(c)(2)(x) may require carriers to place empty containers in open spaces to prevent shifting. Your client wishes to install a moveable bracket to define and secure the partial rows. Specifically, you ask if a wheeled rack equipped with a "moveable bracket" to secure sharps containers satisfies the requirements of § 173.134(c)(2)(x), even if the rack does not contain a full row of containers spanning the entire length of the cart.

Yes. The intent of the "full rows" language in § 173.134(c)(2)(x) is to ensure sharps containers are stowed securely, preventing shifting or tipping during transportation. Based on the information and photograph provided, the moveable bracket may satisfy § 173.134(c)(2)(x), provided it firmly secures the partial row, effectively creating a "full row." The bracket must provide equal or greater strength to a full row of containers. In addition, as stated in § 173.134(c)(2)(x), no shelf may exceed the manufacturer's recommended load capacity, and the wheeled rack must be securely held in place on the motor vehicle.

I hope this information is helpful. Please contact us if we can be of further assistance.

Sincerely,

Alexander Wolcott
Acting Chief, Regulatory Review & Reinvention
Standards and Rulemaking Division

173.134(c)(2)(x)

Regulation Sections