You are here

Pipelines

Below is a list of the sections that have interpretations available for the selected category. To view the interpretations for a given section, click on the subject link below. To return to the list of parts, use the Parts link above.

The eCFR is also searchable by keyword and other available options on the eCFR website. To search and browse regulations using the eCFR website, use the link below. For assistance, please send an email to PHMSA.Webmaster@dot.gov.
Search the eCFR

Section Subject
192.753 Caulked bell and spigot joints
192.755 Protecting cast-iron pipelines
192.801 Scope
192.807 Recordkeeping
192.903 What definitions apply to this subpart?
192.939 What are the required reassessment intervals?
193.2001 Scope of part
193.2005 Applicability
193.2007 Definitions
193.2051 Scope
193.2057 Thermal radiation protection
193.2059 Flammable vapor-gas dispersion protection
193.2181 Impoundment capacity: LNG storage tanks
193.2401 Scope
193.2513 Transfer procedures
193.2621 Testing transfer hoses
193.2707 Operations and maintenance
194.1 Purpose
194.3 Applicability
194.101 Operators required to submit plans
194.105 Worst case discharge
195.1 Which pipelines are covered by this Part?
195.2 Definitions
195.3 What documents are incorporated by reference partly or wholly in this part?
195.4 Compatibility necessary for transportation of hazardous liquids or carbon dioxide
195.5 Conversion to service subject to this part
195.6 Unusually Sensitive Areas (USAs)
195.8 Transportation of hazardous liquid or carbon dioxide in pipelines constructed with other than steel pipe
195.12 What requirements apply to low-stress pipelines in rural areas?
195.50 Reporting accidents
195.54 Accident reports
195.59 Abandonment or deactivation of facilities
195.102 Design temperature
195.106 Internal design pressure
195.110 External loads
195.112 New pipe
195.116 Valves
195.120 Passage of In-Line Inspection tools
195.124 Closures
195.200 Scope
195.204 Inspection-general
195.208 Welding of supports and braces
195.210 Pipelines location
195.212 Bending of pipe
195.214 Welding procedures
195.228 Welds and welding inspection: Standards of acceptability
195.246 Installation of pipe in a ditch
195.248 Cover over buried pipeline
195.260 Valves: Location
195.262 Pumping equipment